Internal ide hard disk drive, What's in the internal ide hard disk drive kit, Installing an internal ide hard disk drive – Konica Minolta PAGEPRO 9100 User Manual
Page 125: Internal ide hard disk drive 119
Internal IDE Hard Disk Drive
119
Internal IDE Hard Disk Drive
One optional internal IDE hard disk is supported.
Attention
Make sure that the printer and all accessories are turned off before
installing accessories involving the controller board.
What's in the internal IDE hard disk drive kit?
The internal IDE hard disk drive kit includes the
following:
IDE hard disk with
ribbon cable attached
IDE hard disk bracket
4 screws
Installing an Internal IDE Hard Disk Drive
Attention
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 106. In addition,
always handle circuit boards by the edges only.
When installing or removing a hard disk, make sure that the metal
support posts (on the hard disk) do not come in contact with any of the
electrical leads on the chips mounted on the controller board. The
controller board will not function if any of the leads are broken or
shorted together.
1
Turn off the printer, and then disconnect the power cord and all interface
cables from the printer.