Konica Minolta PAGEPRO 9100 - Manual (Page 135)

Deinstalling Accessories 129
How do I care for media?
If media has been removed from its wrapper, place it in its original packaging
and store in a cool, dark place.
When storing media, avoid
Moisture, excess humidity
Keep media between 30% to 65% relative humidity. Toner does not
adhere well to moist or wet paper
On the other hand, media that has been stored for a long time without
staying in its packaging may dry up too much and also cause jamming.
Direct sunlight
Excess heat (up to 86° F/30° C)
Dust
Leaning against other objects or placed in an upright position
Store the media in a dust-free area protected from humidity.
Deinstalling Accessories
Attention
Before transporting the printer, remove the toner cartridge, put the
cartridge in its original package or in a plastic bag, and then
transport it without subjecting it to strong impacts.
How do I remove a duplexer?
If both the optional duplexer and the 4-bin mailbox are to be removed,
remove the duplexer first.
1
Turn off the printer, and unplug the
power supply cord and interface
cable.
The illustration shows the printer with-
out a 4-bin mailbox. Follow the same
instructions if a 4-bin mailbox is
installed.