Energy saver, No action needed, X> cover open – Konica Minolta PAGEPRO 9100 User Manual
Page 102: The specified cover is not closed properly, Close the cover, The specified outputbin has jammed media, Idle, The printer is on line, but no jobs are in process, Status, error, and service messages 96
Status, Error, and Service Messages
96
ENERGY SAVER
Energy Saver has been
activated. The printer is
in energy saver mode to
reduce power
consumption during
periods of inactivity.
When a print job is
received, the printer
returns to normal power
within 90 seconds.
While in “deep sleep,”
the printer’s message
window will not display
operator status such as
door- and tray-open
messages. The printer
remains in “deep sleep,”
until a print job is
received, or until the
printer is manually
switched from offline
to online.
No action needed.
<X> COVER OPEN
The specified cover
<X>
is not closed
properly.
Close the cover.
<X> BIN FULL
The specified outputbin
<X> is full and needs to
be emptied.
Remove the media from
the outputbin.
<X> BIN JAM
The specified outputbin
<X> has jammed media.
Locate and remove the
jam. Also, check the
media pickup rollers for
wear. If necessary,
replace all of them.
IDLE
The printer is on line,
but no jobs are in
process.
No action needed.
This message...
means...
do this...