Konica Minolta PAGEPRO 9100 - Manual (Page 42)

Media Storage and Handling 36
Designed for inkjet printers
Multicolored
Preprinted or multicolored (may result in printer jamming)
Use postcards that are
Japanese Post Office standard postcards (3.9 x 5.8:” [100 x 148 mm]) rec-
ommended for laser printers
What should I watch out for when loading thick stock?
Test all thick stock to ensure acceptable performance and to ensure that the
image does not shift.
Do not use thick stock that is
Mixed with any other media in the media trays (this causes media jams)
What should I watch out for when loading transparencies?
Attention
Using unsupported transparency media such as coated color
transparencies will result in damaging the printer and in voiding your
warranty.
Remove transparency media as soon as possible from the output tray to
avoid static buildup.
If you touch the face of transparencies with your bare hands, print quality may
be affected. Do not handle transparency media too much.
Do not fan large quantities of transparency media before loading it.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing envi-
ronment. For the multipurpose tray, if you have problems loading a large
number of transparencies at a time, try loading only 1–10 sheets.
Attention
Use only KONICA MINOLTA-approved transparencies. For a list of
currently approved media, go to printer.konicaminolta.com. To order
approved transparencies, go to printer.konicaminolta.com.
Do not use transparencies that
Are coated, such as transparencies designed for color printers or copiers
Have static electricity that will cause them to stick together
Use transparencies that are
Monochrome, uncoated transparencies (also known as OHP film)