Konica Minolta PAGEPRO 9100 - Manual (Page 34)

Replacing the Transfer Roller 28
4
Place your fingers underneath the
green tabs and rotate the roller upward
away from you .
The metal surface will move upward.
5
Remove the used transfer roller .
Dispose of it according to your
local regulations.
6
Remove the new transfer roller from its
packaging.
Attention
Do not touch the
transfer roller’s
black surface.
7
Lower the new transfer roller straight
in , making sure the shaft is well
seated.
8
Rotate the green tabs downward
so that the metal surface faces you.
9
Align the tabs on the toner cartridge
(one on each side) with the notches in
the printer, and then insert the cartridge
as far as possible into its compartment.
2
1
1
2
2
1