Konica Minolta PAGEPRO 9100 - Manual (Page 50)

Loading Media 44
6
Insert the right end of the paper
retainer
into the slot for the
size of paper to be loaded .
The paper size is detected
depending on the position of
the paper retainer. Correctly
position the paper retainer
according to the size of paper
to be loaded.
7
Slide the paper retainer to the
left , and then press down on
the gray lever to secure the
paper retainer.
Attention
Make sure the paper retainer is
seated properly.
8
Align the four edges of the paper,
and then load the paper printing
side up.
A maximum of 500 sheets (20 lb bond [75 g/m 2 ] plain paper) can be
loaded. If media is loaded past the triangular mark, it may not be fed
correctly.
1
2
Do not load media on this side.
A4, B5, Government
Letter, and Letter A3, B4, and Ledger
Long-edge Feed Examples Short-edge Feed Examples