Konica Minolta PAGEPRO 9100 - Manual (Page 28)

Replacing Rollers 22
Replacing Rollers
How do I replace the paper separation roller?
Paper Separation Roller
1
Pull the media tray out of the printer
until it stops.
The illustration shows the upper
media tray. Follow the same
instructions for the optional
media tray(s).
2
Remove the media tray.
The pickup rollers feed media from the media trays into the printer. When the
pickup rollers deteriorate, media may not feed correctly, resulting in media jams.
Replace the pickup roller in the multipurpose tray each time you have the fuser
replaced, and more frequently if the media is not being picked properly.
The upper and optional media trays’ media pickup roller needs periodic cleaning
but not replacement.
There are two different roller kits—one for the pickup rollers in the multipurpose
tray, and one for the media trays’ paper separation roller.
2
1