Konica Minolta PAGEPRO 9100 - Manual (Page 123)

Fonts and Forms 117
Hardware Requirements
A Macintosh, IBM PC, or compatible computer
Software Requirements
An application (such as a word processing or desktop publishing
package) that supports PostScript printing.
If you’re using a Macintosh, the following Macintosh system software:
KanjiTalk, version J1-6.0.7 or later
System File, version J1-6.0.7 or later
Laser Prep, version J1-6.0.1 or later
LaserWriter, version J1-6.0.2 or later
Print Monitor, version J1-1.3 or later
MultiFinder, version J1-6.1.7 or later
Macintosh OS 8.xJ
If you’re using a PC, the following system software:
If you’re using Windows, version 3.1J or later
If you’re using DOS, version 5.0J or later
Installing a Kanji Font Internal IDE Hard Disk Drive
Attention
The Kanji fonts are factory installed on a formatted hard disk drive. DO
NOT reformat or initialize the Kanji internal IDE hard disk drive.
Reformatting erases all data, fonts, and files on the disk. Your warranty
does not cover this error.
The Kanji font internal IDE hard disk is installed on the controller board in the
same way any internal hard disk is installed. See “Internal IDE Hard Disk
Drive” on page 119 for detailed steps on installing an internal IDE hard disk
drive.
Attention
If you already have an internal hard disk installed, you must remove it
before you can install the Kanji disk.