Konica Minolta PAGEPRO 9100 - Manual (Page 158)

Consumable Life Expectancies 152
Use of consumables not manufactured by KONICA MINOLTA or use of
nonsupported print media may cause damage to your printer and will void
your warranty. If KONICA MINOLTA printer failure or damage is found to be
directly attributable to the use of non-KONICA MINOLTA consumables and/or
accessories, KONICA MINOLTA will not repair the printer free of charge. In
this case, standard time and material charges will be applied to service your
printer for that particular failure or damage.
To order consumables and accessories, check printer.konicaminolta.com for
the KONICA MINOLTA office closest to you.
Item Average Life
Expectancy (in
Simplex Pages) Comment
Fuser 300,000 intermittent
printing (for example,
one-page jobs)
500,000 continuous
printing (average
four-page jobs)
The fuser must be replaced by a
KONICA MINOLTA authorized
service provider. Refer to the
Service & Support Guide or
printer.konicaminolta.com.
Toner
Cartridge
and Exhaust
Filter
At 5% coverage,
Starter Cartridge =
6,000
Replacement
Cartridge = 15,000
continuous printing or
12,000 intermittent
printing (TONER EMPTY
displays in the
message window.)
Replace the toner cartridge and
the exhaust filter at the same time.
If the optional duplexer is
installed, the exhaust filter does
not need replacement.
See “How do I replace and recycle
the toner cartridge?” on page 17.
Media Pickup
Roller—
Multipurpose
Tray Approximately 150,000 User replaces if media misfeeds
in the multipurpose tray fre-
quently,
when the fuser is
replaced, and after every 150,000
pages. See “How do I replace and
recycle the toner cartridge?” on
page 17.
Paper
Separation
Roller—Media
Tray(s) Approximately 200,000 User replaces if media misfeeds
in the media tray(s) frequently,
when the fuser is replaced, and
after every 200,000 pages. See
“How do I replace the paper
separation roller?” on page 22.
Transfer
Roller Approximately 150,000 See “How do I replace the transfer
roller?” on page 27.