HID DTC400E/C30E/M30E User Guide - Manual (Page 5)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 1-5
Adjusting the Color Matching option _________________________________________________ 6-20
Adjusting for the Resin Dither ______________________________________________________ 6-21
Using the Print Both Sides option ___________________________________________________ 6-22
Using the Split 1 Set of Ribbon Panels option __________________________________________ 6-23
Using the Print Back Side First option ________________________________________________ 6-24
Using the Print Back Side Only option________________________________________________ 6-25
Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees options ____________________ 6-26
Using the Disable Printing option____________________________________________________ 6-27
Using the Image Color tab (DTC400e/C30e/M30e)______________________________________ 6-28
Using the Resin Heat (K) option (Front and Back) ______________________________________ 6-29
Using the Overlay Heat (O) option___________________________________________________ 6-30
Using the Color Matching option and Default button_____________________________________ 6-31
Using the Calibrate tab (DTC400e/C30e/M30e) ____________________________________6-32
Using the Image Position Controls ___________________________________________________ 6-33
Using the Sensors button __________________________________________________________ 6-35
Using the Settings button __________________________________________________________ 6-37
Using the Magnetic Encoding tab _______________________________________________6-38
Using the Encoding Mode dropdown list ______________________________________________ 6-39
Selecting the Coercivity/Magnetic Track ______________________________________________ 6-45
Reviewing the Shift Data Left Function _______________________________________________ 6-46
Reviewing the Magnetic Track Options _______________________________________________ 6-47
Using the Character Size buttons ____________________________________________________ 6-49
Using the ASCII Offset dropdown list ________________________________________________ 6-50
Using the Bit Density dropdown list__________________________________________________ 6-51
Using the LRC Generation dropdown list _____________________________________________ 6-52
Using the Character Parity dropdown list______________________________________________ 6-53
Reviewing the ISO Track Locations__________________________________________________ 6-54
Sending the Track Information ______________________________________________________ 6-55
Reviewing the Sample String _______________________________________________________ 6-56
Reviewing the ASCII Code and Character Table ________________________________________ 6-57
Using the Overlay / Print Area tab (DTC400e/C30e/M30e) __________________________6-58
Enabling the Back options _________________________________________________________ 6-59
Using the Front option (Overlay / Print Area) __________________________________________ 6-60
Using the Back option (Overlay / Print Area) __________________________________________ 6-61
Using the Overlay / Print Area dropdown menu ________________________________________ 6-62
Using the Overlay / Print Area ______________________________________________________ 6-64
Using the Defined Area Option _____________________________________________________ 6-66
Using Security Options (Visual Security Solutions) (Front option only) ______________________ 6-70
Selecting Orientation - Landscape under Card tab _______________________________________ 6-71
Selecting the Visual Security Solutions dropdown menu (A to D) __________________________ 6-72
Selecting Orientation - Portrait under Card tab _________________________________________ 6-73
Selecting the Visual Security Solutions dropdown menu (E to H)___________________________ 6-74
Selecting the VeriMark radio button (Frontside option only)_______________________________ 6-75
Selecting HoloMark (Front option only) ______________________________________________ 6-76
Reviewing the Custom VeriMark Card (Custom Graphic in a 2D foil) _______________________ 6-77
Reviewing the Custom HoloMark Card (Custom Graphic in a 2D foil) ______________________ 6-78
Using the K Panel Resin tab (DTC400e/C30e/M30e) ________________________________6-79
Enabling the Frontside and Backside options___________________________________________ 6-80
Enabling the Frontside option (K Panel Resin) _________________________________________ 6-81
Enabling the Backside option (K Panel Resin)__________________________________________ 6-82
Selecting from the Print All Black with K Panel options (Front and Back options) _____________ 6-83
Selecting the Full Card option (Front and Back options) __________________________________ 6-84
Selecting the Defined Area(s) option (Front and Back options)_____________________________ 6-85