HID DTC400E/C30E/M30E User Guide - Manual (Page 113)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 5-7
Telnet Command Command Purpose Command Format
from Restore system log path settings
from the default or current
settings. set syslog from
default|current
add Add a new User definition.
Up to four (4) Users may be
defined.
set user add
del Delete a User definition. set user del
pass
wd Define a new password for a User. set user passwd
[]
type Specify a User as root or guest.
Only root Users have
administrative rights to change
network interface settings.
set user type
root|guest
set user
from Restore User setting from default
or stored settings. set user from
default|stored
addr Store a new IP address. store net addr
mask Store a new address mask. store net mask
gateway Store a new default gateway. store net gateway
dns Store a new DNS server
address. store net dns
domain Store a new DNS domain
suffix. store net domain
store net
opts Enable or disable automatic
address assignment using
DHCP. Static (non-
automatic) addresses will
come from the stored or
default settings, depending
on the other settings. To enable automatic
address assignment:
store net opts dhcp
To disable automatic
address assignment:
store net opts -dhcp