HID DTC400E/C30E/M30E User Guide - Manual (Page 167)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-43
Raw Binary
Encoding
selection
(continued from the
previous page) Raw Magnetic Encoding
The User can select Raw Magnetic Encoding from the Driver.
Raw Coercivity
The User can select options for either High or Low Coercivity from
the Driver.
Raw Bit Density
The User can select the Configurable Bit Density option. This option
supports these standard configurable bit densities:
• 75 Bits Per Inch (BPI)
• 128
BPI
• 210
BPI
• Custom
BPI
Raw Bit Density Per Track
The User can select the Configurable Bit Density, Character Size,
Reverse Bit Order and Add Leading Zero options for each individual
magnetic encoding track.