beautypg.com

Using the erase temperature offset, Using the erase temperature offset -16 – HID DTC400E/C30E/M30E User Guide User Manual

Page 254

background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1)

7-16

Using the Erase Temperature Offset

Step Procedure

1

Adjust the Erase temperature for the rewriteable cards as needed.

• Increase

the

Current Setting to cause more heat to be used in the

erasing process.

OR

• Decrease

the

Current Setting to cause less heat to be used in the

erasing process.

(Note: Erase Temp Offset provides user ability to control the Printhead heat
level when the Erase Operation is performed. Appropriate heat levels should
be applied for the proper erase process. This setting should be adjusted for
proper erasure)

See also other documents in the category HID Equipment: