HID DTC400E/C30E/M30E User Guide - Manual (Page 173)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e/Persona C30e/M30e Card Printer User Guide (Rev. 1.1) 6-49
Using the Character Size buttons
Use this option to customize the Character Data Size (Bits per Character) used to encode
the magnetic data on the currently selected track. (Note: This character size includes the
parity bit (if enabled).)
Step Procedure
1 Select 4 Bits to change the bits per character to 4 BPC. (Note: This is the
default for Track 3).
Select 5 Bits to change the bits per character to 5 BPC. (Note: This is the
default for Tracks 2 and 3).
OR
Select 7 Bits to change the bits per character to 7 BPC. (Note: This is the
default for Track 1).
OR
Select 8 Bits to change the bits per character to 8 BPC.