Allied Telesis SwitchBlade x8112 User Manual

Installation guide, Switchblade x8112

Table of contents

Document Outline

Contents
Figures
Tables
Preface
- Safety Symbols Used in this Document
- Contacting Allied Telesis
Chapter 1
Overview
- Introduction
- AT-SBx8112 Chassis
  - Ethernet Line and Controller Cards Slots
  - Power Supply Slots
- AT-SBx81GT24 Line Card
- AT-SBx81GT40 Line Card
- AT-SBx81GP24 PoE Line Card
- AT-SBx81GS24a SFP Line Card
- AT-SBx81XS6 SFP+ Line Card
- 10/100/1000Base-T Twisted Pair Ports
- Power over Ethernet on the AT-SBx81GP24 Line Card
- Port LEDs on the Ethernet Line Cards
- AT-SBx81CFC400 Controller Fabric Card
- AT-SBxPWRSYS1 Power Supply
  - LEDs
- AT-SBxPWRPOE1 Power Supply
  - LEDs
- AT-SBxPWRSYS1 DC Power Supply
  - LEDs
- AT-SBxFAN12 Module
  - LED
- Power Supply Interfaces (Opto-couplers)
  - LED
- AlliedWare Plus Software Releases for the Hardware Components
Chapter 2
Safety Precautions and Site Requirements
- Reviewing Safety Precautions
- Selecting a Site for the SwitchBlade x8112
- Installation Tools and Material
Chapter 3
Installing the Chassis in an Equipment Rack
- Required Tools and Material
- Preparing the Equipment Rack
- Unpacking the AT-SBx8112 Chassis
- Adjusting the Equipment Rack Brackets
- Installing the AT-SBx8112 Chassis in the Equipment Rack
- Removing the Shipping Brace
- Installing the Chassis Grounding Lug
Chapter 4
Installing the Power Supplies
- Protecting Against Electrostatic Discharge (ESD)
- Installing the AT-SBxPWRSYS1 AC System Power Supply
- Installing the AT-SBxPWRPOE1 PoE Power Supply
- Installing the AT-SBxPWRSYS1 DC System Power Supply
Chapter 5
Installing the AT-SBx81CFC400 Control Card and Ethernet Line Cards
- Guidelines to Handling the Controller and Line Cards
- Installing the AT-SBx81CFC400 Controller Fabric Card
- Installing the Ethernet Line Cards
- Installing the Blank Slot Covers
Chapter 6
Installing the Transceivers and Cabling the Ports
- Cabling Guidelines for the Twisted Pair Ports on the AT-SBx81GT24, AT-SBx81GT40, and AT-SBx81GP24 Line Cards
  - Connecting Cables to the AT- SBx81GT40 Line Card
- Guidelines to Installing SFP and SFP+ Transceivers
- Installing SFP Transceivers in the AT-SBx81GS24a Line Card
- Installing SFP+ Transceivers in the AT-SBx81XS6 Line Card
- Installing AT-SP10TW Cables in the AT-SBx81XS6 Line Card
- Cabling the NET MGMT Port on the AT-SBx81CFC400 Card
Chapter 7
Powering On the Chassis
- Verifying the Installation
- Powering On the AT-SBxPWRSYS1 AC System Power Supply
- Powering On the AT-SBxPWRPOE1 Power Supply
- Powering On the AT-SBxPWRSYS1 DC System Power Supply
- Monitoring the Initialization Process
  - Using the LEDs to Monitor the Initialization Process
  - Using the Console Port to Monitor the Initialization Process
Chapter 8
Verifying the Hardware Operations of the Chassis
- Using the LEDs to Verify the Chassis
- Using Local Management to Verify the Chassis
  - Starting a Local Management Session
  - Entering the AlliedWare Plus Operating System Commands
Chapter 9
Troubleshooting
- AT-SBxPWRSYS1 and AT-SBxPWRPOE1 AC Power Supplies
- AT-SBxPWRSYS1 DC System Power Supply
- Ethernet Line Cards
- Twisted Pair Ports
- Power Over Ethernet
- Fiber Optic Transceivers
- AT-SBx81CFC400 Controller Fabric Card
- AT-SBxFAN12 Fan Module
- Local (Out-of-Band) Management Session
- Power Supply Interfaces (Opto-couplers)
Chapter 10
Replacing Modules
- Replacing AT-SBxPWRSYS1 AC and AT-SBxPWRPOE1 Power Supplies
- Replacing the AT-SBxPWRSYS1 DC Power Supply
- Replacing Ethernet Line Cards
- Replacing the AT-SBx81CFC400 Controller Fabric Card
- Replacing the AT-SBxFAN12 Fan Module
  - Removing the AT-SBxFAN12 Fan Module
  - Installing a New AT-SBxFAN12 Fan Module
Appendix A
Technical Specifications
- Physical Specifications
- Environmental Specifications
- Power Specifications
- Safety and Electromagnetic Emissions Certifications
- Port Pinouts