Allied Telesis SwitchBlade x8112 - Manual (Page 184)

Chapter 8: Verifying the Hardware Operations of the Chassis
184
Figure 131. SHOW VERSION Command
2. Compare the version number displayed by the SHOW VERSION
command with the information in Table 19 on page 61 to confirm that
the version of the AlliedWare Plus Operating System on the controller
card supports all the hardware components in the chassis. If
necessary, update the management software on the controller card.
3. To display the status of the power supplies, fan module, and AT-
SBx81CFC400 Control Cards, use the SHOW SYSTEM
ENVIRONMENT command in the User Exec or Privileged Exec mode.
The Status column in the display provides the states of the modules.
Components are operating normally when they have an “Ok” status.
4. To display the status of the line cards, use the SHOW CARD
command in the Privileged Exec mode A line card has a state of
“Online” when it is operating normally. An example of the status
information is shown in Figure 132.
Figure 132. SHOW CARD Command
swplus# show version
AlliedWare Plus (TM) 5.4.2
Build name : SBx81CFC400-5.4.3.rel
Build date : Wed Jun 2 12:13:19 NZDR 2013
Build type : RELEASE
NEW-SNMP SNMP agent software
(c) 1996, 1998-2000 The Regents of the University of California.
All rights reserved;
.
.
.
Software Version
Number
awplus# show card
Slot Card Type State
---------------------------------------------------
1
AT-SBx81GP24 Online
2 AT-SBx81XS6 Online
3 AT-SBx81GP24 Online
4 AT-SBx81GS24a Online
5 AT-SBx81CFC400 Online (Active)
6 AT-SBx81CFC400 Online (Standby)
7 AT-SBx81GP24 Online
8 AT-SBx81GS24a Online
9 AT-SBx81GP24 Online
10 AT-SBx81XS6 Online
11 AT-SBx81GP24 Online
12 AT-SBx81GS24a Online