Allied Telesis SwitchBlade x8112 - Manual (Page 129)

SwitchBlade x8112 Chassis Switch Installation Guide
129
3. To install the transceiver in an SFP slot on the top row of the line card,
orient the transceiver with the handle on top, as shown in Figure 81. To
install it into a slot on the bottom row of the line card, orient it with the
handle on the bottom.
Figure 81. Handle on SFP Transceiver
4. Slide the transceiver into the slot until it clicks into place, as shown in
Figure 82.
Figure 82. Inserting the SFP Transceiver in the AT-SBx81GS24a Line
Card
Handle