Allied Telesis SwitchBlade x8112 - Manual (Page 72)

Chapter 3: Installing the Chassis in an Equipment Rack
72
Required Tools and Material
Here is a list of the tools and material you need to perform the installation:
 #2 Phillips-head screwdriver
 Crimping tool
 Eight equipment rack screws
 10 AWG stranded grounding wire
 #2 Phillips-head, 5 inch-lbs torque screwdriver (optional)
 #2 Phillips-head, 10 inch-lbs torque screwdriver (optional)
 #2 Phillips-head, 20 inch-lbs torque screwdriver (optional)
Warning
The chassis may be heavy and awkward to lift. Allied Telesis
recommends that you get assistance when mounting the chassis in
an equipment rack.  E30