Allied Telesis SwitchBlade x8112 - Manual (Page 104)

Chapter 4: Installing the Power Supplies
104
Figure 58. Loosening the Handle locking Screw on the AT-SBxPWRPOE1
DC System Power Supply
5. Raise the locking handle on the power supply, as shown Figure 59.
Figure 59. Raising the Handle on the AT-SBxPWRPOE1 DC System
Power Supply
6. Align and insert the AT-SBxPWRSYS1 Module into slot C or D. Figure
60 on page 105 shows the power supply installed in slot D.
Caution
The AT-SBxPWRSYS1 DC System Power Supply will not work in
slot A or B.