Allied Telesis SwitchBlade x3112 - Manual (Page 97)

SwitchBlade x3112 Installation Guide
97
Figure 50. Items Included with the AT-SBxPWRSYS1 Power Supply
Module
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
Note
The tie wrap is used to secure the power cord to the chassis, as
explained in “Powering On the AT-SBxPWRSYS1 AC Power
Supply” on page 155.
4. Check the power supply for its model name, shown in Figure 51 on
page 98, to verify the module.
If you received the AT-SBxPWRPOE1 PoE Power Supply instead, do
not continue with this procedure. Instead, perform “Installing the AT-
SBxPWRPOE1 AC Power Supply” on page 101.
One AT-SBxPWRSYS1 AC
Power Supply Module
One regional AC power cord
One tie wrap