Allied Telesis SwitchBlade x3112 User Manual

Page 147

Text mode
Original mode

SwitchBlade x3112 Installation Guide

147

Installing XFP Transceivers in the AT-SBx31XZ4 Line Card

Please review the information in “Guidelines to Installing SFP, SFP+,
CSFP, and XFP Transceivers” on page 131 before performing this
procedure.

To install XFP transceivers in the AT-SBx31XZ4 Line Card, perform the
following procedure:

1. Remove the dust plug from the slot chosen for the transceiver, as

shown in Figure 103.

Figure 103. Removing the Dust Cover From an XFP Slot on the AT-

SBx31XZ4 Line Card

Note

Do not remove the dust plug from the XFP slot if you are not
installing the transceiver at this time. The dust plug protects the line
card from dust contamination.

2. Remove the transceiver from its shipping container.