beautypg.com

Allied Telesis SwitchBlade x3112 User Manual

Page 144

background image

Chapter 6: Installing the Transceivers and Cabling the Ports

144

Installing AT-SP10TW Cables in the AT-SBx31XS6 Line Card

This procedure explains how to connect AT-SP10TW Cables to the AT-
SBx31XS6 Line Card. The cables may be used in place of fiber optic
cables and transceivers for 10 Gbps links of up to 7 meters.

Note

The AT-SP10TW Cable is only supported in the AT-SBx31XS6 Line
Card.

To install the AT-SP10TW Cable, perform the following procedure:

1. Remove the dust plug from the SFP+ slot chosen for the cable, as

shown in Figure 100.

Figure 100. Removing the Dust Cover From an SFP+ Slot in the AT-

SBx31XS6 Line Card