Allied Telesis SwitchBlade x3112 - Manual (Page 103)

SwitchBlade x3112 Installation Guide
103
Figure 57. Items Included with the AT-SBxPWRPOE1 Power Supply
Module
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
Note
The tie wrap is used to secure the power cord to the chassis, as
explained in “Powering on the AT-SBxPWRPOE1 AC Power Supply”
on page 158.
4. Check the model name, shown in Figure 58 on page 104, to verify the
module.
If you have the AT-SBxPWRSYS1 AC System Power Supply, do not
continue with this procedure. Instead, perform “Installing the AT-
SBxPWRSYS1 AC System Power Supply” on page 95.
One AT-SBxPWRPOE1 AC
Power Supply Module
One regional AC power cord
One tie wrap