Allied Telesis SwitchBlade x3112 - Manual (Page 47)

SwitchBlade x3112 Installation Guide
47
Table 7. Port LEDs on the AT-SBx31GP24 PoE Line Card
LED State Description
L/A
Solid Green The port has established an 1000 Mbps link to a
network device.
Flashing
Green The port is transmitting or receiving data at 1000
Mbps.
Solid Amber The port has established a 10 or 100 Mbps link to
a network device.
Flashing
Amber The port is transmitting or receiving data at 10 or
100 Mbps.
Off The port has not established a link with another
network device or the LEDs are turned off. To turn
on the LEDs, use the eco-friendly button on the
control card.
PoE
Green The switch is detecting a powered device (PD) on
the port and is delivering power to it.
Solid Amber The switch has shutdown PoE+ on the port
because of a fault condition.
Flashing
Amber The switch is detecting a PD on the port but is not
delivering power to it because the maximum power
budget has been reached.
PoE Off This LED state can result from the following
conditions:
 The port is not connected to a PD.
 The PD is powered off.
 The port is disabled in the management
software.
 PoE is disabled on the port.
 The LEDs on the Ethernet line cards are
turned off. To turn on the LEDs, use the
eco-friendly button.