Allied Telesis SwitchBlade x3112 - Manual (Page 132)

Chapter 6: Installing the Transceivers and Cabling the Ports
132
Installing SFP Transceivers in the AT-SBx31GS24 Line Card
Please review the information in “Guidelines to Installing SFP, SFP+,
CSFP, and XFP Transceivers” on page 131 before performing this
procedure.
To install SFP transceivers in the AT-SBx31GS24 Line Card, perform the
following procedure:
1. Remove the transceiver from its shipping container and store the
packaging material in a safe location.
2. Remove the dust cover from the SFP slot chosen for the transceiver.
In Figure 85 the dust cover is removed from port 0 on the line card in
slot 0.
Figure 85. Removing the Dust Cover from an SFP Slot in the AT-
SBx31GS24 Line Card