beautypg.com

Allied Telesis SwitchBlade x3112 User Manual

Page 134

background image

Chapter 6: Installing the Transceivers and Cabling the Ports

134

Note

If you are ready to attach the fiber optic cable to the transceiver,
continue with the next step. Otherwise, repeat steps 1 to 4 to install
the remaining SFP transceivers in the line cards.

5. Remove the protective cover from the SFP transceiver, as shown in

Figure 88.

Figure 88. Removing the Dust Cover from the SFP Transceiver in the AT-

SBx31GS24 Line Card

Note

The dust cover protects the fiber optic port on the SFP transceiver
from dust contamination. It should not be removed until you are
ready to connect the fiber optic cable.