Allied Telesis SwitchBlade x3112 - Manual (Page 78)

Chapter 3: Installing the Chassis in an Equipment Rack
78
Required Tools and Material
Here is a list of the tools and material you need to install the product:
 #2 Phillips-head screwdriver
 Crimping tool
 Eight equipment rack screws
 One 10 AWG stranded grounding wire
 #2 Phillips-head 5 inch-lbs torque screwdriver (optional)
 #2 Phillips-head 10 inch-lbs torque screwdriver (optional)
Warning
The chassis may be heavy and awkward to lift. Allied Telesis
recommends that you get assistance when mounting the chassis in
an equipment rack.  E30
If you purchased the AT-SBxPWRSYS1 DC Power Supply, you also need
these items:
 Two 8 AWG power wires
 One 10 AWG grounding wire
 8 mm wrench
 #1 Phillips-head screwdriver
 #3 Phillips-head screwdriver
 #3 Phillips-head 30 to 40 inch-lbs torque screwdriver (optional)