Samsung SPH-L710ZPBSPR - Manual (Page 76)

Reconnect a Headset or Car Kit
When you have paired a headset with your phone, you should be able to reconnect it automatically by
turning on Bluetooth on your phone and then turning on the headset. However, sometimes you will need
to reconnect manually, for example if you have been using your headset with another Bluetooth device.
1. Press and tap > Settings > Connections > Bluetooth.
2. If Bluetooth is not on, tap the ON/OFF switch to turn it on.
3. Make sure that the headset is discoverable.
4. Tap the headset’s name in the Bluetooth devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect or
Unpair From a Bluetooth Device , and then follow the instructions in Connect a Bluetooth Headset
or Car Kit .
Disconnect or Unpair from a Bluetooth Device
Follow these instructions to disconnect or unpair your phone from a Bluetooth device.
Disconnect from a Bluetooth Device
1. Press and tap > Settings > Connections > Bluetooth.
2. In the Bluetooth devices section, tap next to the device, and then tap Disconnect.
Unpair from a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To connect to the
other device again, you may need to enter or confirm a passcode again.
1. Press and tap > Settings > Connections > Bluetooth.
2. In the Bluetooth devices section, tap next to the device, and then tap Unpair.
Send Information Using Bluetooth
You can use Bluetooth to transfer information between your phone and another Bluetooth-enabled device
such as a phone or notebook computer. The first time you transfer information between your phone and
another device, you need to enter or confirm a security passcode. After that, your phone and the other
device are paired, and you will not need to exchange passcodes to transfer information in the future.
You can send the following types of information, depending on the device you are sending to:
● Images and videos
Web and Data 66