Samsung SPH-L710ZPBSPR - Manual (Page 122)

 To create new messages, tap Create, then follow the prompts.
 To modify an existing message, tap the message, and then edit the text.
Answering/Ending Calls
Manage settings for answering and ending calls.
1. Press and then tap > Settings > My device.
2. Tap Call, and then tap Answering/ending calls to configure these options:
 The home key answers calls: When enabled, you can answer incoming calls by pressing
the Home key.
 Voice control: When turned On, you can answer calls by speaking commands. Tap the
ON/OFF switch to turn Voice control On, then tap Voice control to configure the Incoming
calls option. When enabled, you can answer or reject calls with the voice commands
“Answer” and “Reject”. When you answer a call with a voice command, the Speaker will
automatically turn on for hands-free calls.
 The power key ends calls: When enabled, you can end calls by pressing the Power key. In
this case, pressing the power key during a call will not lock the screen.
Turn Off Screen During Calls
When enabled, the screen automatically turns off during phone calls, and the proximity sensor on the
front of the device is used to turn the screen back on when the device is moved or brought close to
another surface, such as when you move the device to your ear.
1. Press and then tap > Settings > My device.
2. Tap Call, and then tap Turn off screen during calls to enable or disable the setting.
Call Alerts
Set options for sounds and vibrations to occur during calls.
1. Press and then tap > Settings > My device.
2. Tap Call, and then tap Call alerts to configure settings:
 Vibrate on connection to network: When enabled, your phone will vibrate when a call
connects to the network.
 Call-end vibration: When enabled, the phone vibrates when the other caller ends the call.
 Call connect tone: When enabled, the phone plays a tone when the other caller answers a
call.
 Minute minder: When enabled, a tone plays once per minute during a call.
 Call end tone: When enabled, the device plays a tone when the other caller ends the call.
Settings 112