Set result filtering, Table 16, Pressure conversion chart – Vaisala HMT310 User Manual
Page 52

User's Guide _______________________________________________________________________
52 ___________________________________________________________________ M210619EN-E
Table 16
Pressure Conversion Chart
TO
FROM
hPa
mbar
mmHg
Torr
inHg
atm
bar
psi
hPa
mbar
1
1.333224
33.86388
1013.25 1000
68.94757
mmHg
Torr
0.7500617
1
25.40000
760
750.0617 51.71493
inHg
0.02952999 0.03937008 1
29.921 29.52999 2.036021
atm
0.00098692 0.00131597 0.033422
1
0.98692
0.068046
bar
0.001
0.001333224 0.03386388 1.01325 1
0.06894757
psi
0.01450377 0.01933678 0.4911541
14.6962 14.50377 1
Example:
29.9213 inHg = 29.9213 x 33.86388 = 1013.25 hPa/mbar
NOTE
Conversions from mmHg and inHg are defined at 0 °C.
NOTE
Pressure compensation is intended to be used in normal air only. When
measuring in other gases, contact Vaisala for further information.
Set Result Filtering
Syntax: FILT xx
Enable or disable the filtering or select the extended filter to reduce noise
of the measurement.
Where
x = ON, OFF or EXT
ON = Short filter of about 15 s (the measurement output will
show the average value of the last 15 s measurement data)
OFF = No filtering (default)
EXT = Extended filter of about 1 min (the measurement output
will show the average value of the last 1 min measurement data)