Vaisala HMT310 - Manual (Page 44)

User's Guide _______________________________________________________________________
44 ___________________________________________________________________ M210619EN-E
Example:
>seri o changing parity only
4800 o 7 1
>seri 600 n 8 1 changing all parameters
600 n 8 1
Set Transmitter Address for Use in POLL
Mode
Syntax: ADDR aa
Where
aa
= Address (0 ... 99)
Example:
>addr
Address : 0
>addr 1
Address : 1
Temporarily Open Transmitter from
POLL Mode to Receive Serial Commands
Syntax: OPEN nn
Where
nn
= Address of the transmitter (0 ... 99)
The OPEN command sets the bus temporarily in STOP mode so that the
SMODE command can be issued.
Example:
>open 4
Device: 4 line opened for operator commands
>