Ag Leader InSight Cotton Harvest Insert Ver.6.0 Users Manual - Manual (Page 9)

InSight™ Firmware Version 6.0
581
PN: 2002881 Rev.F
A
DDING A
N
EW
C
ONFIGURATION
(
CONTINUED
)
Step 5: Enter header offset
If the header of your vehicle is mounted asymmetrically to
the vehicle’s center, you must enter in the offset distance.
At the Header Offset window shown at bottom left, you can
compensate for the distance between the center of the
vehicle and the center of the header’s swath. Use the
numeric keypad to enter this distance, and then use the
drop-down menu to enter the direction.
Press Next to continue.
Even after you have entered in the header offset
distance number here, you can still edit this number later.
For more information, see “Configuration Settings” on
page 583.