Ag Leader InSight Cotton Harvest Insert Ver.6.0 Users Manual - Manual (Page 41)

InSight™ Firmware Version 6.0
613
PN: 2002881 Rev.F
F
IELD
B
UTTON
- W
HILE
N
OT
L
OGGING
The start of harvest in a field is accomplished by setting up a Field Operation at the Run Screen. This
process is similar regardless of the type of field operation currently taking place. Press the Field button,
and the Field Operation Wizard appears, as shown below.
This procedure assumes that you are not currently logging data in the field. If you are logging data
and you press the Field button, the Field Totals window appears. To see more information about the Field
Totals window and the Field Totals button, see “Field Button - While Logging” on page 618 .
Step1: Select Grower, Farm, Field
At the Field Operation Wizard, choose the field
for harvest by making the proper selections
from the Grower, Farm, and Field list boxes.
If the Filter Fields by Farm check is cleared, the
system will display all fields in the Field list box
regardless of what farm the fields are
associated with.
Press NEXT to continue.
Step 2: Choose Configuration
Select the Operating Configuration that relates
to the equipment in use.
Press NEXT to continue.