Ag Leader InSight Cotton Harvest Insert Ver.6.0 Users Manual - Manual (Page 16)

InSight™ User Guide - Cotton Harvest Insert
588
PN: 2002881 Rev.F
S
ENSOR
S
ETTINGS
The Sensor Settings window contains values of settings that affect the operation of the picker’s cotton
flow sensors. You can access this window by pressing the Sensor Settings button on the Picker Tab.
Sensor Settings Window
Setting Description
The Low Signal Alarm box contains a percentage value that sets the threshold
for the sensors’ low signal strength alarm. Increasing this amount will make
the alarm threshold more sensitive; while decreasing it will make the alarm
threshold less sensitive. A setting of 0 will disable the low signal strength
alarm.
The Zero Flow Threshold box is a setting that compensates for the vibration of
the sensors inside the picker’s chutes.
Adjusting this value will change the current calibration.
The current calibration should be retired before changing this value. After
changing this value, you will need to perform a new calibration.