Ag Leader InSight Cotton Harvest Insert Ver.6.0 Users Manual - Manual (Page 44)

InSight™ User Guide - Cotton Harvest Insert
616
PN: 2002881 Rev.F
R
EGION
S
ELECTION
(
CONTINUED
)
Creating a New Region
Region List
To create a new region press the New button.
You will see a new region appear in the Region
list, with a numeric name shown in brackets, such
as <4>. You may use the keyboard button to
enter your own name for this new region.
If you would like to use this region in
the weight calibration, select the Flag Region
as Calibration Load check box. For more
information on calibration loads, see
“Entering Actual Load Weights” on page 603 .
Variety Tracking menu and Automatic Variety Tracking
Variety Tracking List
Automatic Variety Tracking enabled
If no variety map is present, then you can select a
variety from the Variety Tracking List, as shown
at left.
If you do not want to use the Automatic Variety
Tracking feature, press the Accept button now.
If you want to enable the Automatic Variety
Tracking feature, select only the Automatic
Variety Tracking check box, as shown below left.
(Do not select the Automatic Region Changing
checkbox).
A variety map for the current field and
crop must be present to enable Automatic
Variety Tracking.