HP Insight Management for Tivoli - Manual (Page 162)

Appendix B: HP SNMP events 162
Trap types Rules file Description Netcool
severity
bt2SwDefGwNotInService(5) 5 This event occurs when the
default gateway is alive but not in
service.
Clear (0)
bt2SwVrrpNewMaster (16) 16 This event occurs when the
sending agent transitions to
'Master' state.
Clear (0)
bt2SwVrrpNewBackup(17) 17 This event occurs when the
sending agent transitions to
'Backup' state.
Clear (0)
bt2SwVrrpAuthFailure(18) 18 This event occurs when there is
an authentication failure.
Major (4)
bt2SwLoginFailure(19) 19 This event occurs when there is a
login failure. Major (4)
bt2SwTempExceedThreshold
(22) 22 This event occurs when the switch
temperature exceeds maximum
safety limits.
Critical (5)
bt2SwRackLocationChange(26) 26 This event occurs when the rack
location is changed. Clear (0)
bt2SwApplyComplete(27) 27 This event occurs when a new
configuration is applied.
Clear (0)
bt2SwSaveComplete(28) 28 This event occurs when the new
configuration is saved.
Clear (0)
bt2SwFwDownloadSucess(29) 29 This event occurs when the
firmware is downloaded.
Clear (0)
bt2SwFwDownloadFailure(30) 30 This event occurs when the
firmware download failed. Minor (3)
bt2SwTempReturnThreshold(31) 31 This event occurs when the switch
temperature returns to below
maximum safety limits.
Clear (0)
bt2SwFanFailure(32) 32 This event occurs when a fan
failure is detected. Major (4)
bt2SwFanFailureFixed(33) 33 This event occurs when the fan
failure is fixed.
Clear (0)
bt2SwUfdfoLtMFailure(34) 34 This event occurs when an LtM
link is down.
Major (4)
bt2SwUfdfoLtMUP(35) 35 This event occurs when an LtM
link is up.
Clear (0)
bt2SwUfdfoGlobalEna(36) 36 This event occurs when the
Global UFD is enabled. Clear (0)
bt2SwUfdfoGlobalDis(37) 37 This event occurs when the
Global UFD is disabled.
Clear (0)
bt2SwUfdfoLtdAutoEna(38) 38 This event occurs when an LtD
link is Auto Enabled.
Clear (0)
bt2SwUfdfoLtdAutoDis(39) 39 This event occurs when an LtD
link is Auto Disabled.
Clear (0)
bt2SwCubeInserted(40) 40 This event occurs when a cube is
inserted. Clear (0)
bt2SwCubeRemoved(41) 41 This event occurs when a cube is
removed. Clear (0)