HP Insight Management for Tivoli User Manual
Page 79
![background image](/manuals/398556/79/background.png)
Appendix B: HP SNMP events 79
Trap types
Rules file
Description
Netcool
severity
1f(13601567)
one port is corrected and redundancy is
restored.
sCellEventTrap-06-
20(13601568)
13601568
This event occurs when an unsupported
Fibre Channel device is detected. The
device failed to prevent possible data
corruption or system instability.
Critical(5)
sCellEventTrap-06-
21(13601569)
13601569
This event occurs when a Fibre Channel
device with incorrect block size is
detected.
Clear (0)
sCellEventTrap-06-
23(13601571)
13601571
This event occurs when an HSV300
controller is about to retry a failed port.
Clear (0)
sCellEventTrap-06-
28(13601576)
13601576
This event occurs when the retry count for
an OB task assigned to a Drive Enclosure
Environmental Monitoring Unit is
exhausted.
Clear (0)
sCellEventTrap-06-
29(13601577)
13601577
This event occurs when the HSV300
controller has sent a Basic Link Service
command Abort Sequence Frame.
Clear (0)
sCellEventTrap-06-
2a(13601578)
13601578
This event occurs when the HSV300
controller sends an Extended Link Service
command Reinstate Recovery Qualifier.
Clear (0)
sCellEventTrap-06-
2c(13601580)
13601580
This event occurs when one or more
media defects are detected on a physical
disk drive.
Clear (0)
sCellEventTrap-06-
2d(13601581)
13601581
This event occurs when an HSV300
controller issues a directed LIP to an
arbitrated loop physical address.
Clear (0)
sCellEventTrap-06-
2e(13601582)
13601582
This event occurs when an HSV300
controller detects loop receiver failures.
Clear (0)
sCellEventTrap-06-
30(13601584)
13601584
This event occurs when an HSV300
controller detects only one port of all Fibre
Channel devices in an enclosure.
Critical(5)
sCellEventTrap-06-
31(13601585)
13601585
This event occurs when a previously
reported Fibre Channel device enclosure
with only one port is corrected and
redundancy is restored.
Clear (0)
sCellEventTrap-06-
32(13601586)
13601586
This event occurs when an HSV300
controller has detected only one port of all
Fibre Channel devices on a loop.
Critical(5)
sCellEventTrap-06-
33(13601587)
13601587
This event occurs when a previously
reported Fibre Channel loop with only
one port is corrected and redundancy is
restored.
Clear (0)
sCellEventTrap-06-
34(13601588)
13601588
This event occurs when an HSV300
controller enables a device port, and that
device port is not disabled during boot
diagnostics.
Clear (0)
sCellEventTrap-06-
13601590
This event occurs when an unsupported
Fibre Channel physical disk drive
Critical(5)