HP e-CommerceXML Accelerator sa7150 - Manual (Page 75)

C H A P T E R 4 Scenario 4—Cascaded SA7150s
65
14. Select xmodem as the sending protocol.
15. Click the Send button. The transfer completes and then you are
prompted to verify that you wish to install this configuration.
Do you want to install this config ? [y]: y
16. After verification (y) or refusal (n), the prompt reappears.
HP SA7150>
17. Save the configuration.
HP SA7150> config save
Saving configuration to flash...
Configuration saved to flash
HP SA7150>
18. Repeat steps 11-17 for any additional SA7150s. On the last
SA7150 in the chain, disable spilling with the set spill disable
command.