HP e-CommerceXML Accelerator sa7150 - Manual (Page 136)

C H A P T E R 6 HP e-Commerce/XML Server Accelerator SA7150 User Guide
126
sslOverloadThrottles
Connections were throttled in the past
sslOverloadInterval
appRestartAlert
SSL processing application has restarted
Enabling
SNMP Enabling and disabling SNMP is accomplished with the CLI
command, setsnmp snmp enable|disable. Operational status can be
verified using showsnmp snmp.
Examples:
HP SA7150> setsnmp snmp enable
HP SA7150> showsnmp snmp
SNMP: enable
HP SA7150> setsnmp snmp disable
HP SA7150> showsnmp snmp
SNMP: disable
Specifying SNMP Information
Configurable SNMP parameters can be set collectively using the
setsnmp snmp_info command as illustrated below:
HP SA7150> setsnmp snmp_info
SNMP Port [161]:
SNMP Trap Port [162]:
Contact Person [" "]: support
System Location [" "]: Palo Alto
System Name [" "]: SA7150
Current values of SNMP parameters are displayed using the
shownmp snmp_info command:
HP SA7150> showsnmp snmp_info
SNMP Port Number : 161
SNMP Trap Port Number: 162
SNMP System Contact : "support"
SNMP System Name : "SA7150"
SNMP System Location : "Palo Alto"
System IP Address : 1.2.3.4
System Netmask : 2.3.4.5
Default Route : None