HP e-CommerceXML Accelerator sa7150 - Manual (Page 144)

C H A P T E R 7 HP e-Commerce/XML Server Accelerator SA7150 User Guide
134
RSC: Refused
SSL
Connections When enabled, an alarm is generated whenever SSL connections are
refused for cipher suite mismatch or client certificate authentication
failure during the current user-specified period (5 to 65000 seconds,
default: 15 seconds). The total number of refused SSL connections is
reported along with the reason for refusal. This alarm can be enabled
or disabled at the CLI.
Format:
A:mm/dd/yyyy hh:mm:ss:RSC:CSMM|CCAF:XXX:
/*message*/
Where:
A: identifies the message as an alarm.
mm/dd/yyyy hh:mm:ss: is the timestamp.
RSC: identifies the message as an Refused
SSL Connections Alarm.
Alarm Modifiers and Messages
CSMM: Cipher suite mismatch
CCAF: Client certificate authenticate
failure
Extended Data
XXX: An integer value indicating the number
of refused SSL connections that occurred in
the current alarm period.
RSC Alarm CLI Commands
To set Refused SSL Connections time window:
set rsc_window (Range: 5-65000,
default: 15)
To display Refused SSL Connections time window
show rsc_window
Examples:
HP SA7150> set rsc_window 10
HP SA7150> show rsc_window
Check for refused SSL connections [secs]: 10