HP e-CommerceXML Accelerator sa7150 - Manual (Page 115)

C H A P T E R 5 Command Reference
105
config compare Display differences between saved and current configuration. For
optimal flexibility in configuration and testing, the SA7150
supports both “current” (volatile) and “saved” (non-volatile)
configurations. The config compare command displays the
differences, if any, between the two configurations.
Example:
HP SA7150> config compare
Only in /keys: 4
HP SA7150>
config reset Restore saved configuration.
WARNING: Executing this command causes the system to reboot.
Example:
HP SA7150> config reset
Reverting to saved configuration.
Reset (y/n) [n]: n
HP SA7150>
config default Clears current and saved configurations and restores factory
defaults.
WARNING: Executing this command causes the system to reboot.
Example:
HP SA7150> config default
Reset to factory default configuration [n]: y
Reset to factory defaults
System rebooting...done
config save Save the current configuration to the flash (non-volatile) memory.
Example:
HP SA7150> config save
Saving configuration to flash...
Configuration saved to flash
HP SA7150>
Command Description