HP e-CommerceXML Accelerator sa7150 - Manual (Page 147)

C H A P T E R 7 Alarm Types
137
OVL: Overload
Alarm When enabled, an alarm is issued upon occurrence of overloads
resulting in spills or throttles during the current user-configured
alarm period (5 to 65000 seconds, default: 15 seconds).
WARNING: This alarm
indicates loss of encryp-
tion/decryption. (Normal
SSL operation resumes
when the alarm ceases.) Format:
A:mm/dd/yyyy hh:mm:ss:OVL:SPIL|THRT:XXX:
/*message*/
Where:
A: identifies the message as an alarm.
mm/dd/yyyy hh:mm:ss: is the timestamp.
OVL: identifies the message as an Overload
Alarm.
Alarm Modifiers and Messages
SPIL: indicates overload resulting in a
spill. Message: Spill mode.
THRT: indicates overload resulting in a
throttle. Message: Throttle mode.
Extended Data
XXX: An integer value indicating the total
number of overload events that occurred
during the most recent alarm period.
OVL Alarm CLI Commands
To set Overload Alarm time window:
HP SA7150> set ovl_window (Range:
5-65000, default: 15)
To display Overload Alarm time window:
HP SA7150> show ovl_window
Examples:
HP SA7150> set ovl_window 10
HP SA7150> show ovl_window
Check for overload conditions [secs]: 10