HP e-CommerceXML Accelerator sa7150 - Manual (Page 159)

Troubleshooting
Item Symptom Probable
Cause Remedy
1
Server and/or
Network LEDs not
illuminated. • Unit is in
Bypass mode.
• Improper
cabling.
• If the Inline LED is not illuminated
(solid or blinking) take the SA7150
out of Bypass mode by either
pressing the Bypass switch on the
unit’s front panel or using the CLI’s
inline command.
• Depending on what type of
equipment the SA7150 is connected
to, either straight-through or
crossover Cat-5 network cables are
required for both Network and
Server ports. Switch out the
different cable types at each port
until both Network and Server LEDs
are illuminated.