HP e-CommerceXML Accelerator sa7150 - Manual (Page 149)

C H A P T E R 7 Alarm Logging
139
These alarms can be viewed on the console using the CLI command,
status alarms. Additionally, any logs generated and saved as a result
of an exceptional condition are viewable by using the CLI command,
status . (A list of the viewable log files is displayed
using the list logs command.)
Below are examples of the CLI commands for log viewing, the
defaults, and ranges where applicable:
Examples, list logs and status commands:
HP SA7150> list logs
20000727_145544
HP SA7150> status 20000727_145544
=====================STATE========================
Boot time: Sun Oct 15 17:08:01 2000
Curr time: Tue Oct 17 16:32:52 2000
Restarts: 1
KTR Mask: 0xFFFFF3DD
Total Connections: 0
SSL Connections: 0
XML Connections: 0
Malformed XML Connections: 0
No matching server Connections: 0
Active Connections: 0, 0 (cur, max)
Total Connections/Second: 0, 0 (cur, max)
SSL Connections/Second: 0, 0 (cur, max)
XML Connections/Second: 0, 0 (cur, max)
Util Status:
Secure Bytes Read: 0
Plain Bytes Read: 0
Secure Bytes Written: 0
Plain Bytes Written: 0
Bytes Allocated to dbufs: 0
Bytes Per dbuf: 0
Spill Mode: disable
Transactions Spilled: 0
Times Throttled Accepts: 0
Bypass Mode: disable
L&M board status: INLINE (0x00000040)
Network NIC: 100baseTX Half Duplex