HP e-CommerceXML Accelerator sa7150 - Manual (Page 102)

C H A P T E R 5 HP e-Commerce/XML Server Accelerator SA7150 User Guide
92
inline Enables inline mode, in which the SA7150 processes traffic
normally. (As opposed to bypass mode, in which traffic may flow
through the device unprocessed.)
Example:
HP SA7150> inline
The LED labeled “inline” on the SA7150’s front panel is
illuminated when inline mode is enabled.
NOTE: Other factors may preclude the use of inline mode. See
Failure/Bypass Modes in Appendix B.
set spill Allows you to enable or disable spill mode. “Spill” is used to
offload processing of a request, when the SA7150 has reached a
specified queue threshold, to a secondary SA7150 or to the server.
NOTE: The SA7150 restarts when spill is enabled. Depending on
the size of the current configuration file, it can require from 30
seconds to seven minutes to return to operations.
Example:
HP SA7150> set spill enable
Verify spill setting with the show spill command:
HP SA7150> show spill
Spill on overload: enabled
show spill Display spill setting (enabled or disabled).
Example:
HP SA7150> show spill
Spill on overload: disabled
Command Description