HP e-CommerceXML Accelerator sa7150 - Manual (Page 71)

C H A P T E R 4 Scenario 3—Multiple Server Configuration (SSL)
61
Scenario 3—Multiple Server Configuration (SSL)
This scenario shows how to configure two or more servers.
Single SA7150, Multiple Server Installation
Procedure for
Scenario 3 1. Perform the installation as described in Chapter 2. Access the
SA7150 command prompt.
2. Acquire the appropriate keys and certificates following the
procedure in the Keys and Certificates section in Chapter 3.
3. Create a mapping for Server 1 with the create map command.
HP SA7150> create map
Server IP [0.0.0.0]: 1.1.1.30
Network port [443]:
Cleartext (server) port [80]:
KeyID to use for mapping: default
HP SA7150>
4. Create a mapping for Server 2. As in the previous step, use the
create map command to specify the parameters as prompted.
HP SA7150> create map
Server IP [0.0.0.0]: 1.1.1.31
Network port [443]:
Cleartext (server) port [80]:
KeyID to use for mapping: default
HP SA7150>
Server 1
10.1.1.30
Server 2
10.1.1.31
Hub/switch Router
HP e-Commerce/XML Server
Accelerator SA7150