HP e-CommerceXML Accelerator sa7150 - Manual (Page 156)

C H A P T E R 8 HP e-Commerce/XML Server Accelerator SA7150 User Guide
146
Using HyperTerminal*
Command: import upgrade
Use the SA7150’s aux console port, which defaults to 115.2 kbps, for
greater speed. The import procedure (using xmodem) requires
approximately 7 minutes at 115.2 kbps.
1. Download the image file to the local PC.
2. Connect the serial cable from COM1 or COM2 to the SA7150
aux console.
3. Log in to the SA7150.
4. Type the import upgrade command and press Enter.
HP SA7150> import upgrade
Import protocol: (xmodem) [xmodem]:
Start xmodem upload now
Use Ctl-X to cancel upload
5. In HyperTerminal*, click Send File from the Transfer menu,
select the file (you can type the filename or click the Browse
button to find the file), click to select the transfer protocol (1K
xmodem), and click Send.
Verifying upgrade image...
Upgrade image valid
=== Release x.x
=== Load xx, Fri Aug 25 05:31:51 2000
WARNING: All saved
logs will be deleted and
the system will reboot
upon successful
completion of the
upgrade. 6. Press y (for yes) at the “Continue with upgrade?” prompt.
Continue with upgrade? [n]: y
Upgrading...
System rebooting...done