HP e-CommerceXML Accelerator sa7150 - Manual (Page 131)

C H A P T E R 6 SNMP
121
To display the SSH port:
HP SA7150> show ssh_port
SSH Port Number: 22 0
Disabling SSH SSH sessions are disabled at the SA7150’s local serial console. To
disable, follow the steps below:
HP SA7150> set ssh disable
To verify SSH disable:
HP SA7150> show ssh
SSH: disable
To ensure that SSH sessions remain disabled across a device
shutdown and startup, run the config save command.
SNMP
NOTE: SNMP is
disabled by default. The SA7150 has a fully compliant, embedded SNMP agent that
supports SNMPv1 and SNMPv2c requests. The HP private enterprise
MIB provides the following capabilities:
• Monitors the health of the SA7150’s hardware and network links
• Monitors the flags used to enable and disable alarms and
monitors
• Monitors the SA7150’s load as indicated by CPU utilization,
connection count, and connections per second
• Monitors XML processing statistics
• Monitors status and performance of SSL encryption and
decryption functions
• Monitors overloads, spills, and throttles