HP e-CommerceXML Accelerator sa7150 - Manual (Page 23)

C H A P T E R 2 Physical Installation
13
Accessing the
Command
Prompt After the SA7150 boots up, the password prompt appears.
1. Type admin at the password prompt and press Enter to access
the prompt:
Password: admin (password is not echoed at prompt)
Current date: 2000 11/01 05:01
HP SA7150>
NOTE: The password is
not echoed on the
command line. You are now ready for operations at the Command Line Interface
(CLI) of the SA7150. The following is a typical way to begin:
2. Change your password from admin to another of your choice.
Use the password command.
HP SA7150> password
3. Use set date to correct the date/time, if necessary. The date
and time affect the validity of the certificate.
HP SA7150> set date
4. Use the help command to list available command (or refer to the
Command Reference in Chapter 5 of the User Guide).
HP SA7150> help
5. Configure XML servers and patterns as appropriate for your
business needs. (See Chapter 3 of the User Guide for details.)
6. If your operational model includes SSL traffic, configure the
appropriate keys and certificates. (See Chapter 3 of the User
Guide for details.)