HP e-CommerceXML Accelerator sa7150 - Manual (Page 107)

C H A P T E R 5 Command Reference
97
showsnmp snmp Displays the current status of the SNMP agent: enabled or
disabled.
Example:
HP SA7150> showsnmp snmp
SNMP: enabled
setsnmp snmp_info Set the following SNMP information and parameters:
• SNMP port (Default: 161)
• SNMP trap port (Default: 162)
• Contact person
• System location
• System name
Example:
HP SA7150> setsnmp snmp_info
SNMP Port [161]: 161
SNMP Trap Port [162]: 162
Contact Person []: support
System Location []:Palo Alto
System Name []: SA7150
showsnmp snmp_info Display the currently effective SNMP information and parameters.
Example:
HP SA7150> showsnmp snmp_info
SNMP Port Number : 161
SNMP Trap Port Number: 162
SNMP System Contact : “support”
SNMP System Name : “SA7150”
SNMP System Location : “Palo Alto”
System IP Address : 10.1.2.124
System Netmask : 255.255.255.0
Default Route : None
Command Description